instal the new for ios Comfy File Recovery 6.9

The active RSP card contains the administration configuration for the entire system and distributes the required software to all the other nodes In most situations, you interact with the ROM Monitor mode only on the RSP cards. The router operations cease because the Cisco IOS XR software is no longer running.Īccessing ROM Monitor Mode on the RSP Card If both the primary and standby DSDRSCs are in ROM Monitor mode, then When the Designated Secure Domain Router Shelf Controller (DSDRSC) in an SDR is placed in ROM Monitor mode, the router operationsĪre transferred to the standby DSDRSC (if available). If both the RSP cards are not available or if theĪctive RSP (previously standby) is also placed in the ROM Monitor mode, router operations will stop.ĭesignated Secure Domain Router Shelf Controller (DSDRSC) If a standby RSPĬard is available, then the standby RSP card resumes router operations. If the active RSP card is placed in ROM Monitor mode, it is no longer running the Cisco IOS XR software. This card performs system-wide functions. The active RSP for the owner SDR is called the Designated Shelf Controller (DSC).

Two slots in the chassis are reserved for route switch processors (RSP) cards that provide the central point for chassis The Cisco ASR 9000 Series Router contains series of chassis slots, each of which can hold one of several types of line cards Understanding the Role of the Route Switch Processor (RSP) Card The Cisco IOS XR software takes over, ROM Monitor is no longer in use. The ROM Monitor software is also called the boot software, boot image, or boot helper.Īlthough it is distributed with routers that use the Cisco IOS XR software, ROM Monitor is a separate program from the Cisco IOS XR software.ĭuring normal startup, the ROM Monitor initializes the cards, and then control passes to the Cisco IOS XR software. It is sometimes called ROMMON because of the CLI prompt in ROM Monitor mode.

The ROM Monitor software is known by many names. When you connect a terminal to a card that is in the ROM Monitor mode, the ROM Monitor CLI prompt is displayed. If the Cisco IOS XR software is rebooted or unable to run, the corresponding card returns to the ROM Monitor mode. The ROM Monitor program provides an initial power-on environment for each card. A version of the ROM Monitor softwareĮxists on each card and is factory supplied. The ROM Monitor is a bootstrap program that initializes the ASR 9000 hardware and boots the Cisco IOS XR software when you power on or reload a router.

Instal the new for ios Comfy File Recovery 6.9